Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bike Components

Scotts Valley Cycle Sport has your area's best selection of bike parts and components. Whether you are a road biker, mountain biker, or just need a part for your bike you use around town, we can help you find what you need. Our expert bike shop staff is trained to work on and suggest parts for all types of bikes. Shop online or stop by the shop and let us help you!

iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
e*thirteen by The Hive XCX Chain Guide
$59.95 - $99.99
- XC or Cyclocross top guide, ideal for 1x drivetrains - ST and CX guides mount to 28.6, 31.8 and 34.9 seat tubes - E-Type guides fit Shimano E-Type and SRAM S3 frame mount standards
absoluteBLACK Round Direct Mount Chainring for SRAM 3-Bolt 3mm Offset
$78.99
absoluteBLACK Round Direct Mount 1x Chainrings for SRAM offer flawless drivetrain setup for SRAM 1x9, 1x10, 1x11, and 1x12-speed or single speed. They are designed for SRAM DUB, GXP, and BB30 cranks that have a removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long-Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
Zipp Bearing Kit: For 2005-2008 82/182 Hubs
$39.99
Zipp Speed Weaponry Cartridge Bearings
Zipp SL Sprint Stem
$250.00
You work hard for those watts—don’t lose a single one through your stem. Zipp’s SL Sprint Stem is built with the beefiest carbon layup imaginable for a strength-to-weight ratio that would humble the strongmen in the pro ranks. At 1.8 grams per newton meter of stiffness, the SL Sprint has graced the bars of countless WorldTour pros. Zipp even uses T25 Torx bolts for their unsurpassed strength, resistance to stripping, and accurate torque setting. Rest assured, it’s ready for you.
Zipp SLC2 V2 Handlebars (Traditional Bend)
$300.00
Zipp’s SLC2 bars only flex when they’re at the beach. With an exceptionally stiff carbon layup, the SLC2s stand up to the most demanding conditions and riders. They’re some of the most rigid bars Zipp has designed, making them ideal for sprinting, crit-racing, and gnarly riding on poor pavement or gravel. At 195 grams, they’re feather-light, while Zipp’s VLC technology damps road vibration for total upper body comfort and support.
Zipp Service Course Stem
$55.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp Tangente Platinum Pro Evo Brake Pads
$44.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
Yuba Boda Pegs V3
$30.00
Boda V3 Pegs are the perfect resting place for those little feet aboard the Boda Boda V3. Mounts securely to the side of the frame with the turn of a screw. - Compatible with Boda Boda V3 and elBoda Boda V3 only. - Weight: 1 pound
Yuba Carry-On Spicy Curry
$139.00
When you say, “cargo,” we ask “how much?” With the Carry-On, that’s no longer a question! With the Carry-On you can now create a sturdy 2-foot by 2-foot platform that can handle the biggest and bulkiest loads. - Quick and easy installation, snaps in with spacer bolts creating an ultra-secure fit - 60-pound weight limit per side (when directly loaded), 300 pound overall weight limit with the Spicy Curry - Can be used in conjunction with the Spicy Side Boards to create a "truck bed" feature - M5 eyelets surrounding the edge for custom bolting alternatives - 2-year warranty - Compatibility: Spicy Curry and Sweet Curry
Yuba Deflopilator
$22.00
Stop the flop with Yuba Mundo's Deflopilator. This handy device mounts to the down tube and fork of Yuba Mundo's current-generation cargo bikes to prevent the front wheel from flopping over when you park your ride.
Yuba Hold On
$69.99
Yuba's Hold On gives your traveling companion a sure grip when you're riding about town. This stem/handlebar combo attaches to the seatpost of Yuba Mundo's cargo bikes so they'll feel like they're on a bicycle built for two even if they can't help out with the pedaling.
Yuba Leg Up
$29.99
Sometimes the kidlets need a leg up, and that’s what this aptly named accessory does. Designed to help 4- to 7-year-old kids climb up onto the seat and rest their feet before their legs are long enough to reach the Sideloaders. - Compatible with Mundo V4 and V5s, V4s frame sets, and elMundo BionX - Easy to install with an Allen wrench size 5 - Includes hardware - Yuba 2-Year Warranty
Yuba Passenger Ring
$70.00
Yuba's Ring gives your passengers a safe, comfortable handhold as you cruise the streets looking for adventure. This aluminum accessory mounts to the rails of the passenger seat on Yuba's Boda Boda cargo bicycle.
Wolf Tooth Components 42T GC Cog for Shimano
$89.95
The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette -- always select the correct type for the brand of cassette you have. Compatibility: - Compatible with Shimano 10 speed cassettes listed on the GC tech page - Compatible with all 10 speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - Can be run in 2x configuration with a long cage rear derailleur
Wolf Tooth Components BlingKit
$34.95
Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$69.95 - $79.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components ReMote Dropper Post Lever
$69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wolf Tooth Components ReMote Light Action Dropper Lever
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wolf Tooth Components Seatpost Clamp
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Wolf Tooth Components Tanpan
$44.95
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$13.95
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. 31.8 – 26.0 Handlebar Shim
$13.95
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Aluminum Headset Spacers 1-1/8-inch
$3.25 - $14.75
Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$39.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$42.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30 Outboard ABEC-3 BB
$74.00 - $99.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.95
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8-inch x 15mm
$6.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 15mm spacer
Page 1 of 53 Next page