Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bike Components

RockShox Reverb Brass Post Keys
$4.14
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Race Face M12 bolt for Respond, Chester and Ride DH
$4.55
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Race Face M15 bolt for 2008+ Evolve and Ride
$4.55
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Wheels Manufacturing Inc. Ball Bearing Retainer
$4.75 - $17.00
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
RockShox Reverb Foam Ring Filter
$4.96
Dirty, worn, or damaged Foam Ring Filters can lead to premature wear and damage to your Reverb's internals. Keep that post dropping smoothly and reliably by replacing foam rings at regular service intervals. - Fits all generations of Reverb - Keeps lubrication on the inner shaft assembly
AheadSet Universal Preload Bolt
$4.99
- Aheadset preload adjusting bolt
Jagwire V-Brake Boot
$4.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
KMC Half Link Adapter
$4.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Race Face Chainring Bolt Pack Set of 4 12.5mm Bolt/Nut
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
SRAM Power Link Chain Connector
$4.99 - $17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$4.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
Greenfield RetroKit
$5.00
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
SRAM Master Cylinder/Lever Parts
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Salsa Alternator 1.0 Set Screws
$5.00
Alternator 1.0 Set Screws
Shimano Dura-Ace R9100 11-Speed Cog Spacer
$5.00
Shimano Dura-Ace R9100 Cassette Spacers
Shimano Dura-Ace R9100 Rear Derailleur Cable Anchor Assembly
$5.00
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8-inch x 10mm
$5.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer
Jagwire Sport Slick Stainless Mountain Brake Cable
$5.49 - $13.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
Jagwire Sport Slick Stainless Road Brake Cable
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$5.49
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Wheels Manufacturing Inc. Chainstay Protector
$5.50
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Avid Avid Replacement Barrel Adjuster
$5.95
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
Evo Universal Brake Cable With Housing
$5.99
- Extra long cable length - Road and MTB brake cable ends - 1.6mm x 1900mm