Brakes/Levers/Pads

Magura speed sensor magnet for disc rotor. - Compatible with Magura Storm HC 180mm rotor - Compatible with Magura MDR-C 180mm and 203mm rotors

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

- Aluminum pad holder with R55C4 pads

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Magura hose cover for mt brakes (sleeve nut)bag/10 - Small parts used to install hydraulic hose for Magura disc brakes.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

- Available for carbon and aluminum - Easy to replace and service - Wear evenly and maximizes braking power - Pad Material (RB): Rubber - Type (RB Pads): Road/CX - Rim Compatibility (RB): Aluminum - 2 Pack

Zipp Center Lock Lockring for 140mm to 160mm

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Magura Caliper Cover Ring Kit

Cover kits for Magura brake levers.

Cover kits for Magura brake levers.

Cover kits for Magura brake levers.

Cover kits for Magura brake levers.

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

Put supreme control right at your fingertips with Shimano's Deore Two-Finger V-Brake Levers. Ergonomic lever blades are comfortable and easy to use. The internal bumber offers silent lever return, and the reach can be adjusted to fit your hands.

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

- Forged aluminum arms - 102mm arm length - 158g

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp