Filter By:
Hubs

$143.00
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge

$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body

$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes

$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes

$324.99
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.

$39.99
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.

$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Traditional flange

$56.99 - $69.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)

$29.95
$60.00
50% Off
Light weight 20mm thru axle MTB front hub. Forged from light weight alloy with Hi Lo flanges maximizing the strength-to-weight ratio.
- 20mm thru axle alloy front hub
- Hi Lo flange with CNC disc brake mounts
- 2 sealed cartridge bearings

$152.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance

$94.10
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.

$189.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Hole count: 28

$45.99
- Model Number: HB-M7010-B
- Series: SLX
- Disc Rotor Mount: Center Lock Disc
- Axle Type: 15mm E-Thru
- Axle Length: 110
- Axle Diameter: 17.5
- Spoke Holes: 32H
- Spoke Hole Circle: 44/44
- Average Weight: 158g
Page 1 of 1